© L&M Imaging Systems Ltd., The Birchcliffe Centre, Hebden Bridge, West Yorkshire HX7 8DG Company Number: 02230297		D-U-N-S Number: 399052034		VAT Registration Number: 577302728

L&M Imaging Systems - CONSUMABLES

Infinity - Thermal Positive CtP Plates

• High sensitivity • Multi-layer grain, good water/ink equilibrium • High chemical resistance • Suitable for all conventional 830nm thermal CTP • Long run length (unbaked up to 400,000 impressions) • Suitable for UV inks (unbaked up to 150,000 impressions) • Low imaging power (100 - 110 mJ/cm²) • Excellent dot reproduction (up to 400lpi) • Available in 0.15mm / 0.2mm / 0.25mm / 0.3mm / 0.4mm (These plates can be post baked for 700,000 impressions)

 

Ultra - CTcP Positive Plate (for UV CTP platesetters)

• High sensitivity (400 - 410nm) • Excellent developing performance • Wide tolerance in operating conditions • Long run length (up to 100,000 impressions unbaked) • Suitable for UV inks (unbaked up to 150,000 impressions) • Excellent dot reproduction (up to 200lpi) • Low imaging power (50 - 60 mJ/cm²) • Available in 0.15mm / 0.2mm / 0.25mm / 0.3mm / 0.4mm

NuVio - Violet CtP Plates

• Environmentally friendly • No pre-heat required • No pre-wash needed • Over 100,000 impressions • Neutral chemistry • No separate replenisher • Waste is pH neutral • Easy to clean processor • Up to 200 lpi screening • Available in 0.15mm / 0.2mm / 0.3mm (These plates can be pre and post baked for far longer press runs)

Imagesetter Film

AGFA imagesetter film Daylight loading packaging Visible red and infra red Concentrate Developer and fixer

Silk Screen Emulsion

High quality Silk Screen Emulsion for Direct Imaging Systems • Dual cure polymer diazo • Excellent high definition • Sharp edge • Good exposure latitude • Good mechanical resistance • Solid content 37% • Viscosity ≈ 15.000 cps at 25°c

Textile Fabrics

High quality fabrics from Brook International • Inkjet fabrics from 1.03m to 3.06m wide • Flame retardant options • High definition finish for Direct to Textile • Flags, banners, soft signage and more
© L&M Imaging Systems Ltd. The Birchcliffe Centre, Hebden Bridge, West Yorkshire HX7 8DG

L&M Imaging Systems -

CONSUMABLES

Infinity - Thermal Positive

CtP Plates

• High sensitivity • Multi-layer grain, good water/ink equilibrium • High chemical resistance • Suitable for all conventional 830nm thermal CTP • Long run length (unbaked up to 400,000 impressions) • Suitable for UV inks (unbaked up to 150,000 impressions) • Low imaging power (100 - 110 mJ/cm²) • Excellent dot reproduction (up to 400lpi) • Available in 0.15mm / 0.2mm / 0.25mm / 0.3mm / 0.4mm (These plates can be post baked for 700,000 impressions)

 

Ultra - CTcP Positive Plate

(for UV CTP platesetters)

• High sensitivity (400 - 410nm) • Excellent developing performance • Wide tolerance in operating conditions • Long run length (up to 100,000 impressions unbaked) • Suitable for UV inks (unbaked up to 150,000 impressions) • Excellent dot reproduction (up to 200lpi) • Low imaging power (50 - 60 mJ/cm²) • Available in 0.15mm / 0.2mm / 0.25mm / 0.3mm / 0.4mm

NuVio - Violet CtP Plates

• Environmentally friendly • No pre-heat required • No pre-wash needed • Over 100,000 impressions • Neutral chemistry • No separate replenisher • Waste is pH neutral • Easy to clean processor • Up to 200 lpi screening • Available in 0.15mm / 0.2mm / 0.3mm (These plates can be pre and post baked for far longer press runs)

Imagesetter Film

AGFA imagesetter film Daylight loading packaging Visible red and infra red Concentrate Developer and fixer

Silk Screen Emulsion

High quality Silk Screen Emulsion for Direct Imaging Systems • Dual cure polymer diazo • Excellent high definition • Sharp edge • Good exposure latitude • Good mechanical resistance • Solid content 37% • Viscosity ≈ 15.000 cps at 25°c

Textile Fabrics

High quality fabrics from Brook International • Inkjet fabrics from 1.03m to 3.06m wide • Flame retardant options • High definition finish for Direct to Textile • Flags, banners, soft signage and more